Edwards
APG100 Active Pirani Vacuum Gauges are available in either standard
or corrosion resistant versions offering measurement from atmosphere
to 10-3 or 10-4 respectively. They are compatible with all Edwards
TIC Instrument controllers and are fully RoHS compliant.
APGX-H Active Linear Convection Gauges
The
new Edwards Linear Convection Gauge has a wide measuring range
from 1333 to 3 x 10-4 mbar (1000 to 2.3 x 10-4 Torr). The use of
convection technology ensures, accuracy and sensitivity are maintained
to the top of the range. The gauge is compact and may be mounted
in any orientation, simplifying installation where space is limited.
The gauge incorporates a setpoint and two LEDs, which indicate
setpoint and gauge status. For reduced cost of ownership, the gauge
is provided with a replaceable tube, in which calibration data
is stored.
ATC Active Thermocouple Gauge
The
Edwards Active Thermocouple (ATC-E) gauges mount directly on the
thermocouple tube to form a compact, stand-alone transducer. The
ATC-E electronics module drives both medium and low pressure gauge
tubes providing a package that offers a cost effective measuring
solution for higher pressures.
ASG Active Strain Gauge
The
Edwards Active Strain Gauge (ASG) is a rugged, corrosion resistant
diaphragm gauge which provides accurate, gas independent measurement
from 2000 mbar to 1 mbar. It can be used as a standalone transducer
allowing OEMs and system builders to develop low cost, flexible
solutions to their vacuum instrumentation needs. Alternatively,
it can be connected to the Edwards Active Gauge Controller where
it can be combined with many other sensor types to provide a complete
vacuum instrument solution.
Barocel® Vacuum / Pressure Transducers
The
Barocel Pressure / Vacuum Transducers provide high accuracy, high
stability, gas independent pressure measurement making them ideal
for a wide range of industrial process, research and calibration
applications. Incorporation of a hermetically sealed and heated
enclosure containing the pressure sensing element and critical
electronic circuitry means changes in environmental conditions
have a minimal effect on readings. In addition, the Inconel and
Monel construction allows for use with corrosive processes.
AIM Active Inverted Magnetron Gauge
The
Edwards Active Inverted Magnetron Gauges (AIM) combine the gauge-head
and control electronics in one compact Active unit. These gauges
have proved to be rugged and reliable in a wide range of applications
ranging from scientific instruments to industrial processes.
AIGX Active Ion Gauge
The
Edwards Active Ion Gauge (AIGX) is a compact active ion gauge with
dual yttria coated iridium filaments, a wide measuring range from
5 x 10-2 to 5 x 10-10 Torr (6.6 x 10-2 to 6.6 x 10-10 mbar) and
a 1 Volt/decade linear output. The Edwards AIGX incorporates all
benefits of the industry standard active gauging concept, with
integral electronics and replaceable tube. The gauge has a degas
facility and includes features to protect and extend the life of
the filaments. The AIGX benefits from extremely low emissions of
charged particles, which makes it an excellent choice for processes
where background noise is undesirable.
WRG Active Wide Range Gauge
The
Wide Range Gauge (WRG) family offers the capability of single port
pressure measurement in the range atmosphere to 10-9 mbar, with
a linear output. It's a compact solution, halving the space and
connectivity hardware requirement, which can be all important in
many applications. The WRG has many novel features, including a
patented striker, pushbutton calibration and set point controls
and comprehensive diagnostics. The WRG is a cost-effective vacuum
management solution when used either with a Edwards controller
or directly integrated into the vacuum system controls.
IGC Ion Gauge Controller
The
Edwards Ion Gauge Controller (IGC) provides all the power, control
and signal conditioning required to run one or two ion gauge heads.
The IGC can be linked directly to a control system such as a PLC
to give the OEM or system builder direct access to control inputs
and signal outputs.
TIC Instrument Controllers
The
Edwards TIC Instrument Controllers are compact rack or bench mounted
controllers which have a large clear graphical display, intuitive
user interface and serial communication. This allows full remote
control and data logging functions via a new Windows™ based
PC program. The controller supports and automatically recognizes
up to six gauges from the Edwards range.
Edwards
APG100 Active Pirani Vacuum Gauges are available in either standard
or corrosion resistant versions offering measurement from atmosphere
to 10-3 or 10-4 respectively. They are compatible with all Edwards
TIC Instrument controllers and are fully RoHS compliant.
The
new Edwards Linear Convection Gauge has a wide measuring range
from 1333 to 3 x 10-4 mbar (1000 to 2.3 x 10-4 Torr). The use of
convection technology ensures, accuracy and sensitivity are maintained
to the top of the range. The gauge is compact and may be mounted
in any orientation, simplifying installation where space is limited.
The gauge incorporates a setpoint and two LEDs, which indicate
setpoint and gauge status. For reduced cost of ownership, the gauge
is provided with a replaceable tube, in which calibration data
is stored.
The
Edwards Active Thermocouple (ATC-E) gauges mount directly on the
thermocouple tube to form a compact, stand-alone transducer. The
ATC-E electronics module drives both medium and low pressure gauge
tubes providing a package that offers a cost effective measuring
solution for higher pressures.
The
Edwards Active Strain Gauge (ASG) is a rugged, corrosion resistant
diaphragm gauge which provides accurate, gas independent measurement
from 2000 mbar to 1 mbar. It can be used as a standalone transducer
allowing OEMs and system builders to develop low cost, flexible
solutions to their vacuum instrumentation needs. Alternatively,
it can be connected to the Edwards Active Gauge Controller where
it can be combined with many other sensor types to provide a complete
vacuum instrument solution.
The
Barocel Pressure / Vacuum Transducers provide high accuracy, high
stability, gas independent pressure measurement making them ideal
for a wide range of industrial process, research and calibration
applications. Incorporation of a hermetically sealed and heated
enclosure containing the pressure sensing element and critical
electronic circuitry means changes in environmental conditions
have a minimal effect on readings. In addition, the Inconel and
Monel construction allows for use with corrosive processes.
The
Edwards Active Inverted Magnetron Gauges (AIM) combine the gauge-head
and control electronics in one compact Active unit. These gauges
have proved to be rugged and reliable in a wide range of applications
ranging from scientific instruments to industrial processes.
The
Edwards Active Ion Gauge (AIGX) is a compact active ion gauge with
dual yttria coated iridium filaments, a wide measuring range from
5 x 10-2 to 5 x 10-10 Torr (6.6 x 10-2 to 6.6 x 10-10 mbar) and
a 1 Volt/decade linear output. The Edwards AIGX incorporates all
benefits of the industry standard active gauging concept, with
integral electronics and replaceable tube. The gauge has a degas
facility and includes features to protect and extend the life of
the filaments. The AIGX benefits from extremely low emissions of
charged particles, which makes it an excellent choice for processes
where background noise is undesirable.
The
Wide Range Gauge (WRG) family offers the capability of single port
pressure measurement in the range atmosphere to 10-9 mbar, with
a linear output. It's a compact solution, halving the space and
connectivity hardware requirement, which can be all important in
many applications. The WRG has many novel features, including a
patented striker, pushbutton calibration and set point controls
and comprehensive diagnostics. The WRG is a cost-effective vacuum
management solution when used either with a Edwards controller
or directly integrated into the vacuum system controls.
The
Edwards Ion Gauge Controller (IGC) provides all the power, control
and signal conditioning required to run one or two ion gauge heads.
The IGC can be linked directly to a control system such as a PLC
to give the OEM or system builder direct access to control inputs
and signal outputs.
The
Edwards TIC Instrument Controllers are compact rack or bench mounted
controllers which have a large clear graphical display, intuitive
user interface and serial communication. This allows full remote
control and data logging functions via a new Windows™ based
PC program. The controller supports and automatically recognizes
up to six gauges from the Edwards range.